At Maclouis, we have developed depth controls in various versions that can be used on both harvesters and haulm toppers. This makes it possible to adapt the machines as much as possible to the harvesting conditions. All depth controls require between 8-10 litres of oil per minute.
This depth control is easily adjusted by turning a spindle. Probes with a large skid control the cylinders via a valve. The robust skid is fitted with a hardox wear strip. This wear-resistant type of metal extends the life of the probes. It is possible to mount plastic plates under the probes, so that in case of different travel distances or wet conditions, the probes do not sink into the ground.
The depth control is controlled by sensors. The probe is thinner and fitted with a hardox wear strip. The height of the wheels can be adjusted left and right separately from the cabin. The topper height is adjustable by turning probes in or out. The control box in the cabin has two joysticks, one for left and one for right. Control via Load-Sensing is possible.
The probes are the same as for the depth control with sensors. With this depth control, the height can be accurately adjusted separately on the left and right from the cab by adjusting the angle sensors located on each probe. The control box in the cabin is equipped with two joysticks, which allow left and right depth adjustment separately. Control via Load-Sensing is possible.
De inhoud die hier wordt weergegeven kan niet worden weergegeven vanwege de huidige cookie-instellingen.
Deze website kan inhoud of functies aanbieden die door derden op eigen verantwoordelijkheid wordt geleverd. Deze derden kunnen hun eigen cookies plaatsen, bijvoorbeeld om de activiteit van de gebruiker te volgen of om hun aanbiedingen te personaliseren en te optimaliseren.
Deze website maakt gebruik van cookies om bezoekers een optimale gebruikerservaring te bieden. Bepaalde inhoud van derden wordt alleen weergegeven als "Inhoud van derden" is ingeschakeld.
